Hardening cars
Working Principle

The tilting hanger the module 90 in the air, demoulds the blank and puts it on the cutting table together with the side plate. The blank on the cutting table is cut by the longitudinal cutting device through the motor and its own running. After completion and running at the pause position, the blank is cut horizontally by the motor to the center of the blank. The cross cutting holder drops and cuts vertically from up to down until it is reset upward.

Main Technical Date

Serial Number

Name

  Unit

  Index

  pemarks

    1

capacity

kw m3/y

    5-15

annual production

    2

Size ofblank

    M

    4×1.2×0.6

net

    3

Precision of cutting

       mm

    5/1 0

vcrLicalcuttin9/cross cutting

    4

precision of cutting

       mm

    ±3±1.5±1.5

1ength、widthand height

    5

Precision of production

   min/m

    5

 

    6

Quailty of master cutting machinery

    t

    12

verticalellttin9/cross cotting

    7

Installed
Capacity of mastercutting machinery

    kw

    11.4

Including hydraulic station